ROUTER-1 CONFIGURATIONS

STEPS:

[Edit the Tunnel]
1. Tunnel No.: 1 ---> The number are auto incremented once you set more tunnel
2. Tunnel Name: ---> Name what you like
3. Interface: WAN1, WAN2, WAN3......?? ---->Select WAN port to use to communicate remote router
4. Enable : checked by default

[Local Group Setup]
5. Local Security Gateway Type: IP Only
6. IP address: xxx.xxx.53.43 ---> auto generated from interface dropdown menu.
7. Local Security Group Type: Subnet
8. IP address: 192.168.1.0 -----> LAN IP of router1 and the last octet should be set to 0.
9. Subnet Mask: 255.255.255.0

[Remote Group Setup]
10. Remote Security Gateway Type: IP Only
11. IP address : xxx.xxx.203.135
12. Subnet Mask : 255.255.255.0

[IP Sec Setup]
13. Keying Mode: IKE with Preshared key
14. Phase 1 DH Group: Group1
15. Phase Encryption : DES
16. Phase Authentication: MD5
17. Phase SA life Time: 28800
18. Perfect Forward Secrecy: checked box
19. Phase2 DH Group : Group1
20. Phase2 Encryption: DES
21. Phase2 Authentication : MD5
22. Phase2 SA life Time: 3600
23 Preshared Key: mt ----> Note: Both local router and remote are the same preshared key.

ROUTER-2 CONFIGURATION
(Just reverse the R1 and R2 on router-1)











Good Luck!!!